PRODUCT DESCRIPTION
Vertical sliding door suitable cold rooms having negative temperatures up to -45°C, equipped with EN13241-1 certified anti-fall safety systems.
- For negative temperatures up to -45°C
- Blade thickness available: 121 and 151mm
- Polyurethane density 45 Kg/m³
APPLICATIONS
- Suitable for cold rooms used for the preservation of foods at a temperature from -5° and up to –45°C.
- The vertical sliding doors are mainly used in: plants for the meat processing, cheese factories, deposits for the preservation of fruit and vegetables, slaughters, ice cream industry. where isn't possible to install sliding door.
Select type:
Blade
- Blade edge in anodized aluminium (thickness 121mm or 151mm) with PVC profile for second gasket;
- Blade covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10 mm;
- Outside handle: fixed;
- Inside handle:plastic deep-set“
- N°2 EPDM double density gaskets on 3 sides;
- Lower gasket in PVC.
Frame system
- Frontal frame (140mm) with side frame in PVC colour RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it’s assembled (90°) with joints;
- Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);
- Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable.
- Heating cable ~30W/m powered at 220V and put inside the frame.
Blade
- Blade edge in stainless steel 304 thickness 15/10 (total thickness 121mm or 151mm, included the bearing in PVC of the gasket ) folded and welded;
- Blade coated with stainless steel 304 sheet thickness 6/10;
- Outside handle: fixed;
- Inside handle:plastic deep-set“
- Double density EPDM gasket on 3 sides;
- Lower gasket in PVC.
Frame system
- Frame in PVC , coated with stainless steel 304 sheet thickness 6/10;
- Side-frame in PVC , coated with stainless steel 304 sheet thickness 6/10;
- Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable.
- Heating cable ~30W/m powered at 220V and put inside the frame.
Sliding system
- Motion is conveyed by 2 Ø6mm cables. They are positioned on the right and on the left corners in order to correctly lift the door;
- The door is well-balanced by one only counterweight. This is to let the mounting be easier and to reduce the side dimensions;
- The aluminium guide has been especially conceired for such a door and it meets all the safety, sturdiness and easy istallaton requirements;
- The limit stop grants a perferct baskets crushing;
- The plastic roller grants a linear motion and reduces the noise.
Security :
- The use of 2 cables connected at the same counterweight produces a safety redudancy. This is because whether one cable is cut, the other is able to support the door.
- In case both the cables are cut, a special falling prevention safety device doesn’t allow the door to be closed.
Standard dimensions one blade version
- Up to 3000x3500mm;
- When both sides have a dimension bigger than 2500 mm, the blade is divided, horizontally, in two parts (the lower part is realized with H=1250mm while the upper part is given by the difference) and the frame is supplied dismounted.
